It’s not always easy to remove an old Dell monitor stand, but it doesn’t have to be a stressful experience either. With the right steps and some patience, you can get your monitor off the stand quickly and easily, and get back to your work or entertainment in no time!
Tired of your old Dell monitor stand taking up space on your desktop? Ready to replace it with something sleeker and more modern? It’s easier than you think!
All you need to do is follow this simple guide on how to remove the Dell monitor stand.
Preparing to Remove the Dell Monitor Stand:
Before you begin removing the stand, it is essential to prepare your workspace. Make sure that your computer is turned off and all cables are unplugged from the monitor. You should also clear your workspace of any clutter to ensure that you have enough space to work.
The tools required to disassemble a Dell monitor stand typically include:
- A Phillips head screwdriver or a hex key, depending on the type of screws used to attach the stand to the monitor.
- A clean, flat surface to work on.
- A soft cloth or towel protects the monitor screen from scratches.
Removing the Dell Monitor Stand:
Here is a comprehensive step-by-step guide on how to take off the stand
- Turn off your computer and unplug all cables from your monitor. This will ensure your safety and prevent any damage to your computer or monitor.
- Lay the monitor screen down on a soft, flat surface. This will make it easier to access the back of the monitor and remove the stand.
- Locate the releasing lever or button on the back of the monitor. The location of this button depends on the model of the monitor, but it is usually located near the bottom of the stand.
- Press the stand and release it with one hand as you hold the monitor with your other hand. Apply a bit of pressure while pressing down on the lever.
- While pressing the button or lever, gently pull the stand away from the monitor. Pull it off to one side, then the other side.
- If you want to remove the handle as well, you can find a small hole on the back of the monitor where the handle is attached.
- Insert a needle or small screwdriver into the hole and press down. If you feel something click, that means the handle has been released.
- Holding the release button down, pull the handle away from the monitor towards you. You may hear a clicking sound, which means the handle has been fully released.
- Once the stand and handle have been removed, store them in a safe place. Place them in a box or a bag to prevent any damage or scratches.
Use Alternative Method By VESA Kit:
Alternative methods for dismounting the stand include using VESA adaptors or mounting brackets. These methods are typically used when the user wants to set up the monitor or other types of support regarding adjusting the monitors.
To use VESA adaptors, the user will need to purchase a VESA adaptor kit that is compatible with their Dell monitor. The kit will include the adaptors and any necessary screws or brackets.
To remove the stand using VESA adaptors, the initial steps follow for same;
- Unplug the monitor from the power source and disconnect any cables attached to it.
- Lay the monitor face-down on a clean, flat surface.
- Locate the monitor stand screws. These are typically located at the bottom of the monitor, near the stand.
- Using Phillips tools, remove the screws that attach the stand to the monitor.
- Attach the VESA adaptors to the back of the monitor using the screws provided in the kit.
- Mount the monitor on the wall or other support using the appropriate brackets.
- Carefully connect any cables and plug the monitor back into the power source.
Different models of Dell monitors may have different types of stands and attachment mechanisms, which means that the process for removing the stand can vary depending on the specific model of the monitor.
For example, some Dell monitors may have a stand that is attached with screws that are visible from the front of the monitor, while others may have screws that are hidden beneath a plastic cover or require the use of a specialized tool.
The stand of some monitors is permanently attached to the monitor and cannot be removed, while others have a removable stand that can be changed.
To remove the stand from a particular Dell monitor model, consult the user manual or contact Dell customer support. Failure to follow the correct procedure could result in damage to the monitor or injury to the user.
Troubleshooting Common Problems:
Sometimes, taking down the Dell monitor stand may not be as straightforward as it seems. Here are some common issues that you may encounter and how to troubleshoot them.
1. The stand won’t release
If you’re having trouble releasing the stand, make sure that you are pressing the release button correctly. Try using a tool, such as a pen or a screwdriver, to press the button if your fingers are not strong enough. If the button still won’t release, try gently wiggling the stand from side to side as you press the button.
2. The stand is difficult to slide out
If the stand is stuck and won’t slide out, gently wiggle it from side to side while holding the button. If this doesn’t work, you may need to use a tool, such as a flathead screwdriver, to help loosen the stand.
3. The monitor wobbles after removing the stand
If the monitor wobbles after you remove the stand, it is likely because the screws that were holding the stand in place are still in the monitor. Make sure to remove any screws or mounting brackets before installing a new stand or mounting the monitor on a wall.
Here are two DIY solutions
1. Use a plastic pry tool
If you don’t have a screwdriver or don’t want to risk scratching your monitor, a plastic pry tool can be a great alternative.
These tools are designed to be gentle on delicate surfaces, and they can help you release the stand gently. To use a plastic pry tool, simply insert it between the stand and the monitor and gently apply pressure until the stand releases.
2. Use a rubber band
If the button for releasing the stand is difficult to press or won’t release the stand, a rubber band can help. Simply wrap a rubber band tightly around the stand release button and pull it away from the monitor.
The rubber band will create additional leverage, making it easier to release the stand. This solution is particularly helpful if you have limited hand strength or dexterity.
Tips and Tricks for Safe Removal of Dell Monitor Stand
1. Use proper tools for safety
To disconnect the monitor stand safely, it’s essential to have the right tools at hand. These tools could be a screwdriver or a plastic pry tool that can help in releasing the stand without causing any damage to the monitor. Using the right tools will help to ensure that the process goes smoothly without causing any harm to the monitor.
2. Avoid using excessive force
It is crucial to gently take off the stand avoiding applying excessive force. Applying too much force can lead to damaging the monitor, and it can also cause physical harm to the person removing the stand. Therefore, it’s essential to follow the right steps and use the right tools to avoid using excessive force.
3. Do not touch the screen
When taking apart the stand, it’s important to avoid touching the screen. The screen is sensitive and can easily get scratched or damaged if not handled properly.
Touching the screen with dirty hands or sharp objects can also leave marks and make the screen difficult to clean. Therefore, it’s important to handle the monitor with care and avoid touching the screen.
4. Use a soft surface to place the monitor
You should place the Dell monitor on a soft surface after removing the stand. Placing it on a hard surface can cause damage to the screen or other components.
A soft surface, such as a clean towel or a soft cloth, will help to protect the monitor from any damage while it’s being moved or placed. Place the monitor out of reach of children and away from areas where it could be accidentally kicked or damaged.
Karan is a professional computer writer who has worked in the technology industry for over 10 years. I have a degree in computer science from the University of California, Berkeley, and have written several articles on technology products. Meet our team